The plant
An aluminium facade plant in Haiyan, built around export projects
Boli Technology (Jiaxing) Co., Ltd designs, coats and assembles aluminium curtain wall and panel systems for contractors, architects and importers in North America, the Gulf and Europe. One plant, one drawing office, one quality system.
- Founded
- 2006
- m² annual capacity
- 1,000,000
- Product systems
- 4
Assembly hall, Haiyan. Photograph for layout only — replace with plant photography before launch.
The plant
Cutting, coating and assembly under one roof
A facade package is only as predictable as the weakest supplier in the chain. That is why extrusion, CNC machining, PVDF coating and unit assembly sit inside the same plant: a colour change or a profile revision does not have to wait for a third-party coater’s schedule, and the person who inspects the unit is employed by the same company that ships it.
Capacity is 1,000,000 m² of finished facade a year, which in practice means we can run a residential tower and a panel order for a podium at the same time without one starving the other. Large orders are scheduled in phases tied to the client’s installation sequence rather than in one shipment.
The drawing office works in English, in DWG and Revit, and reports to the same production manager as the shop floor. When a detail cannot be fabricated as drawn, you hear it from the engineer before the extrusion is cut.
Quality control
Five checks between the coil and the container
Our ISO 9001:2015 system is organised around the points where a facade defect is usually created — not around a final inspection that can only reject, not correct.
- 01
Incoming material
Alloy certificates, temper and coating batch records are checked against the purchase specification before anything is cut.
- 02
In-process inspection
Cut lengths, machining positions and fold dimensions are checked at each station against the shop drawing, not at the end of the line.
- 03
Dimensional check per unit
Every unitized panel is measured on a jig and recorded against its panel number before glazing.
- 04
Water and air testing
Sample assemblies are tested to EN 12152 / EN 12154 as part of the mock-up, and re-tested after any profile change.
- 05
Pre-shipment inspection
A photographic record of packing, labelling and container loading is issued with the shipping documents.
Timeline
Twenty years, one site
The short version of how a domestic fabricator became an export supplier with an in-house coating line and a unitized assembly hall.
- 2006
Plant established in Haiyan
Aluminium fabrication starts with a single machining hall serving domestic facade contractors.
- 2012
In-house PVDF coating line
Coating moves from a third-party coater into the plant, which shortens colour-change cycles and stabilises batch matching.
- 2016
First North American export order
Unitized assembly begins, and the drawing office is restructured around English-language shop drawings and AAMA specifications.
- 2020
Honeycomb and large-format panel line
A continuous lamination line adds honeycomb panels and modules up to 1.5 × 6 m.
- 2024
Capacity reaches 1,000,000 m² a year
CNC cutting, assembly and packing expand to a single continuous flow through the plant.
Milestone dates are placeholders for the skeleton build — confirm them with the company record before launch.
Export
How an order leaves the plant
Ports
Ningbo and Shanghai, both within 150 km of the plant. FOB, CIF or DDP through our freight partners.
Packing
Steel stillages and purpose-built crates, panels interleaved and labelled by elevation and floor.
Documents
Packing list, commercial invoice, certificate of origin, test reports and insurance issued with the B/L.
After shipment
Installation drawings, a site QA checklist and a named contact for replacement panels during the install.
About BLTC
Want to see the plant before you place an order?
We host factory visits and video audits for contractors and consultants. Tell us which system you are evaluating and we will prepare the line, the mock-up and the QA records for the visit.