Skip to content
BLTC — Imagination at Build Boli Technology (Jiaxing) Co., Ltd.
Menu

Compliance

Tested to the standards your consultant names

Four certifications cover the way we are specified: a coating standard, a curtain wall product standard, the Australian glazing standard and our quality system. Certificates are issued per project and per profile family.

Certified standards
4
Certificate issue
Per project
Test basis
EN 12152

Certifications

Coating performance

AAMA 2605

Certified

Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminium Extrusions and Panels

What it covers

The North American benchmark for architectural PVDF coatings: ten-year South Florida exterior exposure, colour and gloss retention, chalk resistance, chemical resistance and film adhesion.

Why it matters on your project

Specified on most US and Canadian facades. A 70% KYNAR 500 coating system is normally the route to compliance, and the warranty on your facade is written against it.

Coating systems supplied to AAMA 2605; batch certificates issued per order.

Request this certificate

Curtain wall product

EN 13830

Certified

Curtain Walling — Product Standard

What it covers

The European product standard for curtain walls, covering air permeability, watertightness, wind resistance, thermal transmittance, impact resistance and safety.

Why it matters on your project

The default specification basis for projects in the EU, the Gulf and much of Asia. Test evidence is classified under EN 12152, EN 12154, EN 12155 and EN 13501-1.

System test reports available per profile family on request.

Request this certificate

Windows & glazed doors

AS 2047

Certified

Windows and External Glazed Doors in Buildings (Australia / New Zealand)

What it covers

Structural, water and air performance requirements for external glazing in Australia and New Zealand, referenced against AS 1170 wind actions and AS 1288 glass design.

Why it matters on your project

Required for Australian and New Zealand projects. Cyclonic regions add further requirements on glazing and anchorage that must be designed in, not tested on.

Tested assemblies available for AU/NZ projects; certificates issued per system.

Request this certificate

Quality management

ISO 9001:2015

Certified

Quality Management Systems — Requirements

What it covers

Certification of the quality management system covering design, extrusion, coating, assembly, inspection and dispatch of aluminium facade systems.

Why it matters on your project

Most international contractors and developers require a certified QMS before a supplier is added to the bid list. It also underpins our inspection and test plan for each order.

Current certificate and audit summary available on request.

Request this certificate

Documentation

Documents issued with a project

Test evidence is only meaningful when it matches the profile and glass build-up you are buying. We release the set against the project specification rather than as a generic pack.

Certificates are issued per project and per profile system. We do not publish third-party certificate scans on this website — request the current set from our QA team and we will send the signed copies with the quotation.

Compliance

Need a certificate for a tender submission?

Send the tender clause and the profile family you are evaluating. We will confirm which test evidence applies, issue the signed copies and flag anything the clause requires that we do not currently hold.

Get a quote Download specs